Inquiry form
MORE CREATION, MORE VALUE
Fuji Chemi Trading Co., Ltd. / Toward the value that customers demand
Reasons to be chosen
REASONS
01
One-stop service at domestic and overseas bases contributes to simplification of commercial distribution and reduction of transportation costs for the customers.
With bases in Thailand / Vietnam / China, we handle processing, inventory, and sales by ourselves as needed in various area of Southeast Asia and China.Japanese stuffs are stationed at each base. Detailed sales follow-up provided by them and local stuffs has been highly evaluated by both Japanese and local companies.
02
With the customer’s point of view, we support Small Lot Sales to meet clients needs, not only propose a wide range of products.
If you tell us your needs, we will perform attentive service to you in domestic and overseas trading. Not only searching the most suitable one in the existing items, but also we will jointly develop products that meet your requirements, and respond to the processing as needed. We also support Sales in Small Lot when items are in stock in our warehouse.
Processing Service
03
Our history as a trading company goes far beyond simply “connecting” businesses; it is a legacy of continuously creating new value.
Since our establishment in 1951, we have grown as a trading company specializing in chemicals, supported by our many valued business partners. Looking ahead, we will continue to strive toward realizing our vision of “Value-Creating Trading,” contributing to the development and prosperity of our partners, the industry, and society as a whole.
Company History
Recommended
products
RECOMMEND
Water-absorbing, deodorizing, soil-improving bag “F+BAG ACE”
This highly functional bag is made from natural materials and is sustainable, returning to the earth. It can also be used as compost.
Small lots available
Heat shield/UV cut sheet “F+COOL”
Simultaneously cuts out infrared rays (IR) and ultraviolet rays (UV) from sunlight, suppressing temperature rise without getting dark and reducing electricity bills.
Small lots available
Small lot sales of HOTMELT SHEET
Sell HOTMELT SHEET in units of 1 meter. Please contact us for small volumes.
Small lots available
Small lot sales of RELEASE FILM
Sell Highly Heat-resistant and Releasable Films (Silicon and Fluorine-free) in units of 1 meter. Please contact us for small volumes.
Small lots available
Small-Lot and Small-Quantity Sales of Fluoropolymer Films
We sell Fluororesin film (Neoflon film) by the meter.
Please contact us for small rolls or other custom requests.
Small lots available
Small lot sales of HUMOFIT®
HUMOFIT®, a product developed by Mitsui Chemicals, Inc., is a new material that gently supports people by taking advantage of its ability to conform to the body at human body temperature.
Compact Seawater Desalination Unit MYZ® E-60/250
The NETIS-registered “MYZ®” series of compact desalination units can generate fresh water directly at sea or river sites.
Super Absorbent Polymer: EF Polymer
EF Polymer (Eco-Friendly Polymer) is a super-absorbent organic polymer made by upcycling fruit peels and other organic waste.
Solutions by Use Case
新素材HUMOFIT®で体温フィット製品のサイズフリー化を実現｜温度依存性シートの少量・小口・加工販売
「ヒトの体温に反応して柔らかく変形し、触れたカラダをやさしく包む」――そんなユニークな新素材「HUMOFIT®（ヒューモフィット®）」を、当社では少量・小口・加工販売しています。28℃以上で柔らかくなり、フェルトのように緩やかに元の形に戻る温度依存性により、インソール・帽子・靴・枕・ゴルフグリップ・ヘッドフォン・RFIDタグベルトなど、サイズフリー化・無駄削減・新しい使用感を提供したい商品開発に幅広く活用されています。HAMA R&D「エキップAFG」インソールの椅子など、採用実績も増加中です。 アパレル・スポーツ・雑貨領域で広がる「サイズフリー化」「体型対応」のニーズ 靴・帽子・インソール・枕・ベルト・グリップなど「ヒトのカラダに触れる製品」は、個人の体型・サイズ・嗜好の違いに合わせて多サイズ展開する必要があり、在庫・廃棄ロス・販売管理の負担が増大しています。さらに、汎用のクッション材・ウレタン単体では「最初は馴染むが時間と共にヘタる」「圧迫感がある」「成形済みのサイズしか選べない」といった課題も残ります。新商品開発の現場では、(1) サイズフリー化により在庫・廃棄を減らしたい(2) 体温で馴染んでフィットする新しい使用感を提供したい(3) アート・ファッション領域で従来素材にない造形性を表現したいというニーズが急速に高まっています。●顕在化する場面：靴・インソール・帽子・かばん／枕・寝具／ゴルフグリップ・ゴーグル・ヘッドフォン／時計バンド・RFIDタグベルト／組立玩具／アート作品・椅子等のオリジナル製品開発。●主な影響：在庫SKU増大、サイズ違い返品コスト、廃棄ロス、フィット感クレーム、他社との差別化困難。 なぜ実現できないのか：体温域での可逆変形を持つ素材の希少性と少量入手の壁 「常温では硬く、体温（28℃以上）で柔らかく変形し、放置すれば緩やかに元の形状に戻る」――この温度依存性を持つ素材は市場に極めて少なく、量産メーカーは大ロット販売が中心で試作・小ロットでの入手が困難でした。さらに、シート状の素材を実際の製品（インソール／グリップ／ベルト等）に仕上げるためには、穴あけ・フロッキー・ニット生地ラミネートなどの加工対応力が必須で、素材と加工をワンストップで相談できる窓口がほぼ存在しませんでした。結果として、商品企画者・デザイナー・アーティストが「使ってみたい」と思っても手が届かない状態が続いていました。●特定の根拠：三井化学法に基づく代表物性測定（シート厚さ・目付・引張破断荷重・ガラス転移点Tg）、当社F+BAND／F+GRIP開発過程での加工実証、HAMA R&D等の採用事例。 これまで試した対策とその限界 EVA・ウレタン等の汎用クッション材での代替（フィット感とヘタリの両立が困難）、形状記憶ポリマーの試作（体温域での感度と再現性が不足）、大ロット購入での試作（試作コストが過大で小規模商品化に至らず）、海外輸入（最小ロット・納期・加工対応の壁）など、いずれも「体温域の可逆変形」「少量試作」「加工対応」のいずれかが欠落していました。 解決アプローチ：温度依存性新素材の独占的供給 × 少量・小口・加工対応 当社は、温度依存性シート「HUMOFIT®」（F10／F20／A11）を少量・小口で加工販売し、商品企画段階から量産・OEMまで伴走します。穴あけ・フロッキー・ニット生地等とのラミネートまで対応し、HUMOFITを使ったオリジナル製品「F+BAND」「F+GRIP」も自社展開しています。 実用化が期待される要素 帽子 靴 インソール ベルト 枕 ゴルフグリップ 組み立て玩具 ゴーグル ヘッドフォン 時計バンド RFIDタグベルト STEP. 01 用途ヒアリングと銘柄選定 目的（インソール／帽子／グリップ／ベルト／枕 等）、必要なフィット感・厚み・透明度をヒアリングし、F10（厚み0.5mm発泡品）／F20（厚み0.35mm発泡品）／A11（厚み0.4mm透明）から最適銘柄を提案します。A4サイズでの試作提供も可能です。 STEP. 02 サンプル試作とフィット評価 離型フィルム付きで出荷し、お客様社内でアイロン等の加温による可塑性確認、装着時のフィット感評価を実施。F+BANDのように体温で巻きつけて固定するベルト用途、F+GRIPのようにヌバック生地と複合した滑り止めグリップ用途など、参考事例もご提供します。 STEP. 03 加工とOEM量産対応 穴あけ加工・フロッキー加工・貼り合わせ加工・ニット生地ラミネートまで対応。巾50〜1,200mm、長さ1〜30mのロール出荷で量産化も支援。採用実績ベースのOEM展開もサポートします。 フジケミ・トレーディングの提供体制：本社×水戸加工センター×協力メーカー 本ソリューションは、複数拠点の役割分担で成立しています。・ 本社・営業／技術：HUMOFIT®の独占的取扱、銘柄選定・物性データ提供、商品企画・デザイナー・アーティスト向け窓口、F+BAND／F+GRIPの企画運営。・ 水戸加工センター： 原反在庫、スリット、抜き加工等の少量試作対応。・ 協力メーカー：穴あけ・フロッキー・ニット生地との貼り合わせ加工等の周辺加工。●供給体制：ご入金確認後、在庫の有無を確認の上、納期をご連絡。A4サイズの小口提供から巾50〜1,200mm／長さ1〜30mのロール出荷まで対応。特殊加工・複合化のご相談も承ります。 導入による成果 HUMOFIT®を活用した商品開発により、「サイズフリー化による在庫・廃棄削減」「体温フィットによる装着快適性向上」「他社にない触感・デザイン性での差別化」が同時に実現しています。HAMA R&D「エキップAFG」インソール（2025年4月採用）、FASHION FRONTIER PROGRAM 2023作品（2023年12月）、アートワーク採用（2023年9月）など、商品からアートまで幅広い採用が進んでいます。●KPI候補：SKU数削減／返品率低減／装着クレーム低減／他社差別化・新規メディア露出／オリジナル製品（F+BAND／F+GRIP）売上。●導入リードタイム：サンプル評価から商品化まで短期間。商品コンセプト段階からのご相談も歓迎します。 想定される波及効果と横展開 本ソリューションの導入効果は、主課題の解決にとどまりません。社内提案・経営層提案の材料としてもご活用ください。・靴・インソール領域での量産採用拡大（インソール → 機能性シューズへの展開）・ベルト・時計バンド・グリップ等の身につける雑貨でのサイズフリー化展開・枕・寝具・座面（椅子）など寝具・家具領域への拡張・FASHION FRONTIER PROGRAM等のファッション・アート領域でのブランディング寄与・ヘッドフォン・ゴーグル・RFIDタグベルトなど精密機器・IoTデバイスとの組み合わせ 同業他社との違い：なぜフジケミ・トレーディングが選ばれるのか 温度依存性シート「HUMOFIT®」の少量・小口・加工販売を担う商社は当社が中心で、商品企画段階からの伴走・加工対応・OEM展開を一気通貫で支援できます。さらに、F+BAND（圧迫感なく巻きつけて固定するバンド）／F+GRIP（汗をかいても滑りにくいグリップ）といった応用製品を自社開発しており、HUMOFIT®を使った具体的な商品化のヒントを「現物」で提示できる点が独自の強みです。 製品情報・スペック概要 温度依存性データ .movie-box2 { width:100%; } 採用実績のある製品の主なスペックは、用途と要求条件によって複数のグレードからお選びいただけます。代表的な仕様は以下の通りです（詳細スペックはお問い合わせください）。 項目HUMOFIT®F10（代表物性）備考シート厚さ0.5mm三井化学法・23℃目付250g/m²三井化学法・23℃引張破断荷重（TD：シート幅方向）65N/25mm三井化学法・23℃ガラス転移性 Tg（熱特性）28℃三井化学法（固体粘弾性）・4℃/min銘柄展開F10／F20／A11厚み・性状・透明性で選定加工サイズ（巾／長さ）50〜1,200mm／1〜30m通常離型フィルム付・A4サイズ提供可加工対応スリット／穴あけ／フロッキー／ニット生地貼り合わせ等相談に応じます 活用方法・運用例 加工例 穴あけ加工 フロッキー加工 貼り合わせ加工 実際の運用は、以下のようなパターンが多く採用されています。・インソール：体温でフィットし足型に馴染む。・帽子・靴・かばん：フィット感向上、サイズ展開を絞り込み在庫を削減。・ベルト・時計バンド：体温で柔らかくなりフィット、装着圧の調整が容易。・枕・椅子座面（アキオコーポレーション様事例）：頭・体重で形状に馴染み、戻る。・ゴルフグリップ・ヘッドフォン・ゴーグル：手・耳・顔への当たりを最適化。・RFIDタグベルト・組立玩具：温度で形を変えて装着・組み立てができる新しい使用感。・オリジナル製品 F+BAND（圧迫感なく固定）／F+GRIP（汗でも滑りにくい）：応用事例として直接ご提案。・アート・ファッション作品（FASHION FRONTIER PROGRAM等）：従来素材にない造形表現。 体温（28度以上の温度）でゴムのように柔らかく変形し、腕や足などに伸ばしながら巻きつけて固定すると圧迫感なく優しくフィットします。 「F+BAND（エフ・バンド）」パンフレット ヌバック生地と複合した高性能グリップテープで汗をかいても滑りにくく、蒸れにくい構造に加えて、フィット感が向上することで圧力を分散し手や足の負担を軽減します。 「F+GRIP（エフ・グリップ）」パンフレット FAQ（よくある質問） HUMOFIT®はどのような原理で柔らかくなりますか ガラス転移点（Tg）が28℃近辺にある事から、体温等30℃以上の温度で柔らかく変形し、逆に25℃以下の低温では硬くなる性質を有しております。 少量・小口で購入できますか 可能です。A4サイズでの提供にも対応しており、ご入金確認後、在庫の有無を確認のうえ納期をご連絡します。 加工はどこまで対応してもらえますか 穴あけ加工・フロッキー加工・抜き加工そしてニット生地等との貼り合わせ加工もご相談に応じて対応可能です。 銘柄の使い分けは F10は厚み0.5mmの発泡品で標準用途、F20は厚み0.35mmの発泡品で初期の柔軟性付与、A11は厚み0.4mmの透明品でデザイン重視用途に適しています。用途・要求物性に応じてご提案します。 採用実績はありますか HAMA R&D様のインソール「エキップAFG」（2025年4月）、FASHION FRONTIER PROGRAM 2023（2023年12月）、アートワーク（2023年9月）など、商品・椅子・アートで採用が進んでおり、その他特殊加工製品の工程材としての採用実績もございます。 オリジナル製品（F+BAND／F+GRIP）の使い方は 水系オレフィン接着剤（特殊接着剤）をF+BANDは体温（28℃以上）でゴムのように柔らかく変形し、腕や足に伸ばしながら巻きつけて固定すると圧迫感なくフィットします。F+GRIPはヌバック生地と複合した滑りにくく蒸れにくい高性能グリップテープで、ゴルフグリップ等で圧力分散と負担軽減を実現します。専用パンフレットもご提供可能です。取り扱っています。金属との相性が良く、ブラックライトで塗布部を目視確認できるため、防水・防湿材として電子部品・電線・車両用途で採用されています。 関連する用途・課題別の提案 ■遮熱＆UVカットシート「F+COOL」で電気代削減と猛暑対策を同時に｜JIS認証取得・自社開発のオリジナル製品■ホットメルトシートで接着工程の有機溶剤・乾燥工程を削減｜少量・小口・短納期で環境配慮型接着を実現■FPC離型フィルムの小ロット・スリット加工｜在庫品から短納期で評価サンプルを供給
アパレル・スポーツ用途
サイズフリー化
小ロット・加工サービス
新素材 x 新規開発
自社開発オリジナル製品
Reducing Organic Solvents and Drying Processes in Adhesion with Hot Melt Sheets | Achieving Eco-Friendly Adhesion with Small Lots, Small Quantity, and Short Delivery Times
"We want to eliminate organic solvent odors from the adhesion process," "We want to reduce drying oven space and electricity bills," "We want to test in small quantities or small lots," "We want die-cut shapes"—to address these challenges, we propose our thermoplastic adhesive sheets, "Hot Melt Sheets." Available in sheet and film forms, you can cut and use only the required amount, and adhesion can be achieved via heat pressing with an iron or similar equipment. We supply a wide range of grades—including olefin-based, polyester-based, urethane-based, PVC, multi-layer products, and custom composite materials—in small quantities and small lots with short delivery times, starting from just a few A4 sheets. Three Major Adhesive Challenges: Organic Solvent Odor, Drying Process, and the Wall of Small-Lot Purchases At production sites using adhesives, three major obstacles are frequently heard:(1) Odors and handling difficulties associated with solvent-based adhesives,(2) Line occupancy and high electricity bills caused by drying ovens and curing times,(3) Existing suppliers failing to respond to needs such as "We only want a small amount for testing" or "We want to die-cut into a special shape."Particularly in areas close to the human body or precision parts, such as food packaging, hygiene products, and electronic components, shifting to an adhesion method that does not use organic solvents has become an urgent matter. On the other hand, during development and prototyping phases, flexible responses like "We want to evaluate performance with a few A4 sheets" or "We want to die-cut into the shape of our own product" are required.● Scenarios where this becomes apparent: Prototyping phases for new product development / Improvement of existing line environments (solvent-free shift) / Compliance with safety regulations for hygiene products and food packaging / Production startup for electronic components (FFCs, tab leads, etc.) / Assembly process improvement for automotive parts.● Main impacts: Workplace environment deterioration due to organic solvent odors and VOC emissions, power consumption and floor space occupancy from the drying process, increased prototype costs caused by large procurement lots, and development stagnation due to unfulfilled requests for special shapes. Why Going Solvent-Free Is Delayed: The Triple Hurdle of Applicable Resins, Shape Accommodation, and Small-Lot Sales The hot melt method inherently offers major advantages, as it enables adhesion through heat pressing alone without solvents and eliminates the need for a drying process. However, the primary reasons for delayed adoption at production sites lie in a triple hurdle:(1) Difficulty finding a resin grade that matches the substrates (PP, PE, PET, metal, fabric, etc.),(2) Lack of commercial distribution channels that can arrange the required thickness, size, and die-cut shape from a small lot,(3) Limited number of suppliers possessing application-specific expertise, such as for FFC reinforcement plates and secondary battery tab leads.As a result, despite the desire to go solvent-free, a situation persists where companies cannot break away from conventional solvent-based adhesives.● Grounds for identification: Customer site hearings regarding substrate and adhesive strength requirements, melting point and characteristic comparisons across various resin systems (olefin / polyester / urethane / PVC / composite materials), and cross-referencing internal evaluation data for A4 prototypes. Countermeasures Attempted So Far and Their Limits Enhanced ventilation for solvent-based adhesives and drying oven expansion (environmental burdens and costs remain), replacement with double-sided tape or hot glue (insufficient strength, heat resistance, and shape flexibility), in-house heat molding of general-purpose hot melt raw materials (excessive prototyping costs and unstable quality), and direct importation of overseas products (large minimum lots preventing prototyping). In all cases, either "solvent-free shift," "small-lot prototyping," or "special shape accommodation" was missing.Based on these limitations, we adopted the following approach as a more fundamental solution. Solution Approach: Proposing Resin-Based Grades × Small-Lot/Small-Quantity Supply × Die-Cutting & Composite Processing Melt only the required amount for immediate adhesion Die-cutting into any desired shape is possible From a broad lineup including olefin, polyester, urethane, PVC, multi-layer, and composite materials, we propose the optimal grade matching your substrates, heat resistance conditions, and adhesive strength. Furthermore, we accommodate sheet shapes, die-cutting processing, and custom composite materials (such as flame-retardant VTM-0 equivalent products) for only the required amount, supplying them in small quantities and small lots with short delivery times starting from just a few A4 sheets. STEP. 01 Substrate/Condition Hearing and Grade Selection We conduct hearings on the materials to be bonded (PP, PE, PET, metal, fabric, etc.), required adhesive strength, heat resistance, elasticity, low-temperature adhesion necessity, and expected pressing temperature. We present the optimal grade from olefin-based (heat resistance, low-temperature adhesion), polyester-based (high adhesion to PET/metal), urethane-based (elasticity), PVC (low cost), and others. STEP. 02 Immediate Shipment of A4 Samples and Customer Evaluation We also respond to consultations like "We just want a few A4 sheets for testing." We immediately ship small lots with release sheets, allowing you to perform heat pressing tests using an iron or similar equipment within your company. Consultations for die-cutting special shapes, such as star or wave shapes, are also available. STEP. 03 Application-Specific Custom Composite Materials and Mass Production Supply We plan and mass-produce custom-made products tailored to each application, such as covering materials for FFC wires (flame-retardant VTM-0 equivalent composite materials), multi-layer products for secondary battery tab leads, solar cell backsheets, and PET bottle body-wrap labels. We ensure a stable supply in various thicknesses, widths, and lengths, centering around 30 to 150 μm thicknesses. Fuji Chemi Trading's Supply System: Headquarters × Mito Processing Center × Japanese Manufacturer Collaboration This solution is established through a clear division of roles among multiple bases:・ Headquarters / Sales & Technical: Substrate and required physical property hearings, resin grade proposals, sharing of application examples (food, electronics, automotive), and sample coordination.・ Mito Processing Center: Accommodating sheet cutting, slitting, and die-cutting processes, immediate shipment of small A4 samples, and composite material prototype support.・ Partner Manufacturers: Joint development of custom composite materials and various hot melt master rolls such as olefin, polyester, and urethane systems.● Supply System: We handle both roll products and cut products in small quantities and small lots with short delivery times. We provide comprehensive support from testing consultations for just a few A4 sheets to continuous supply during mass production. Results of Implementation By replacing solvent-based adhesives with hot melt sheets, we have simultaneously achieved:(1) Zero organic solvent odors and VOC emissions,(2) Process shortening, floor space reduction, and electricity reduction by eliminating drying ovens,(3) Reduced material loss by cutting and using only the required amount,(4) Improved assembly precision through die-cut accommodation.Since work can begin with small A4 quantities from the prototyping stage, development speed has also been significantly shortened.● KPI Candidates: VOC emission reduction / Drying process power consumption reduction / Assembly man-hours reduction / Defect rate reduction / Prototyping lead time reduction / Material loss rate reduction.● Implementation Lead Time: Samples of a few A4 sheets can be shipped immediately. After mass production specifications are finalized, we provide short delivery times in wound rolls or cut shapes. Anticipated Ripple Effects and Horizontal Expansion The benefits of implementing this solution extend beyond solving the primary issues. Please utilize this as material for internal and management proposals.・Promoting solvent-free practices in human-contact areas such as food packaging and hygiene products → Safety regulation compliance and brand value improvement・Extension to mass-produced items in electronic and energy fields, such as FFC reinforcement plates, secondary battery tab leads, and solar cell backsheets・Simplification and automation of assembly processes for automotive mats, PET bottle labels, clear cases, etc.・Joint development expansion into components with strict regulatory requirements, such as flame-retardant VTM-0 equivalent products・Moisture-proof and waterproof proposals for joining metal/olefin parts by combining with water-based olefin adhesives Differences from Competitors: Why Fuji Chemi Trading is Chosen While many trading companies only sell master rolls, we provide a one-stop service covering "grade proposals + small-quantity small-lot supply + die-cutting/cutting at our Mito Processing Center + custom composite material planning." Being able to conduct prototype evaluations starting from just a few A4 sheets and possessing an accumulation of specialized applications—such as FFC reinforcement plates, secondary battery tab leads, and flame-retardant composite materials—is our unique strength. Furthermore, we can offer combination proposals with adjacent products, such as water-based olefin adhesives (where the application area can be checked under a blacklight). Product Information & Specification Overview The main specifications of products with a proven track record can be selected from multiple grades depending on the application and required conditions. Representative specifications are as follows (please contact us for detailed specs). Hot Melt TypeThickness (μm)CompositionMelting Point (°C)FeaturesSubstrate / Main ApplicationsOlefin-based30–150Hot melt alone + release sheet66–150Heat resistance, low-temperature adhesionPP, PE, othersPolyester-based30–150Hot melt alone + release sheet105–126High adhesion strengthPET, metal, othersPolyester-based (for reinforcement plates)30–Hot melt alone + release sheet—FFC reinforcement platesPET, metal, reinforcement platesUrethane-based30–150Hot melt alone + release sheet100–135 (Softening point)Excellent elasticityFabric, othersPVC70–Hot melt alone + release sheet85–Low costFabric, othersMulti-layerTotal thickness 100–Hot melt alone / Hot melt alone—Multi-layering with different melting pointsFor secondary battery tab leadsComposite material (Custom-Made)Representative example: 25/27Flame-retardant hot melt / PET or other films—Flame-retardant VTM-0 equivalentCovering material for FFC wires / PET / metal Utilization Methods and Operation Examples In actual operations, the following patterns are frequently adopted:・Food Packaging: Complying with food hygiene regulations through solvent-free and low-temperature adhesion.・Corrugated Cardboard & Bookbinding: Omit the drying process to improve manufacturing throughput.・Diapers & Sanitary: Achieving comfortable adhesion against the skin using the elasticity of urethane systems.・Clear Cases & PET Bottle Body-Wrap Labels: Balancing transparency and adhesive strength with polyester systems.・Solar Cell Backsheets & Automotive Mats: Handling applications requiring heat resistance using olefin systems and composite materials.・FFC Wire Covering Materials & Secondary Battery Tab Leads: Addressing high-performance requirements in electronic and energy fields with flame-retardant composite materials and multi-layer products.・Combined Use of Water-Based Olefin Adhesives: Serving as a moisture-proof and waterproof material for metal/olefin joints, where the applied section can be visually verified under a blacklight. Food Packaging Corrugated Cardboard Bookbinding Diapers & Sanitary Products Clear Cases Solar Cell Backsheets Automotive Mats Straw Attachments PET Bottle Body-Wrap Labels FAQ (Frequently Asked Questions) What are the main applications? They span a wide variety of areas, including electronic components (FFC reinforcement plates, secondary battery tab leads), electric wires, vehicles, emblems, apparel, printed wiring, furniture materials, building materials, food packaging, and hygiene products. We want just a few A4 sheets for testing; is that possible? Yes, we can prepare them. Please inform us of your substrates, expected pressing temperature, and required number of sheets. We will ship them with a short delivery time. How do we choose the right resin system that matches our substrate? Based on the rule of thumb, we propose olefin-based for PP/PE, polyester-based for PET/metal, urethane-based for fabrics or when elasticity is required, and PVC when low cost is prioritized, while also taking heat resistance conditions and adhesive strength into account. Is die-cutting or special shape processing possible? Yes, we can accommodate die-cutting processing tailored to the shapes you want to bond, such as star or wave shapes. Our Mito Processing Center handles both prototyping and mass production. Can you accommodate composite materials with flame-retardant specifications? We have a track record with flame-retardant VTM-0 equivalent products (Custom-Made) that integrate flame-retardant hot melt and PET film. They are adopted for covering materials for FFC wires and other applications. Do you also handle water-based adhesives? We handle water-based olefin adhesives (special adhesives). They have good compatibility with metals and their application area can be visually checked under a blacklight, so they are adopted as waterproof and moisture-proof materials for electronic components, electric wires, and vehicle applications. Proposals by Related Applications and Challenges ■ Achieve Electricity Bill Savings and Extreme Heat Countermeasures Simultaneously with Heat-Shielding & UV-Cut Sheet "F+COOL" | An Original Self-Developed Product with JIS Certification■ Realize Size-Free Body-Fitting Products with the New Material HUMOFIT® | Small-Quantity Small-Lot Processing and Sales of Temperature-Dependent Sheets■ Small-Lot and Slitting Processing for FPC Release Film | Supplying Evaluation Samples with Short Lead Times from Stock Items
小ロット・加工サービス
工程削減・生産性向上
環境・省エネ対応
自社開発オリジナル製品
高機能材料 x 新規開発
遮熱＆UVカットシート「F+COOL」で電気代削減と猛暑対策を同時に｜JIS認証取得・自社開発のオリジナル製品
猛暑による電気代高騰と暑熱負荷は、工場・店舗・住宅・屋外施設のいずれにとっても看過できない経営課題です。当社のオリジナル製品「F+COOL（エフ・クール）」は、太陽光エネルギーの約50%を占める近赤外線（IR）を効率反射し、紫外線（UV）も99.9%以上カットする遮熱・UVカットシートです。不織布タイプ・シート強化タイプの2グレードと水戸加工センターでの加工対応により、窓ガラス・屋上・エアコン室外機・テント・日傘・ベビーカーカバーなど、用途に応じたソリューションを少量から提供します。 猛暑・電気代高騰の同時進行：工場から住宅まで広がる「遮熱ニーズ」 地球温暖化の影響で日本国内・ASEAN各国とも夏季の最高気温更新が続き、空調負荷が利益を圧迫しています。同時に電力料金の値上げ・燃料費調整単価の上昇により、エアコン稼働時間が長い工場・店舗・住宅の電気代削減はSDGs対応とセットで経営テーマ化しています。 近赤外線（IR）／紫外線（UV）を一枚で同時カット F+COOL（エフ・クール） 一方、窓ガラス・屋上・室外機・屋外ベンチなど「日射を直接受ける部位」は、輻射熱で表面温度が60℃を超えるケースも多く、室内側の温度上昇・空調効率低下・機器寿命短縮を招きます。猛暑期だけでも対策したい、しかも工事を伴わない手軽な打ち手がほしい――そうしたお困りごとがBtoB／BtoC双方から増えています。●顕在化する場面：工場・倉庫・店舗の屋根／窓／室外機、住宅の窓・屋根、屋外施設（公園ベンチ・人工芝・駐車場・タープ）、自動車（ダッシュボード・ボンネット）、雑貨（日傘・ベビーカーカバー・ヘルメットカバー）など、日射を受けるあらゆる部位。●主な影響：電気代・燃料費の高騰、空調機器の過負荷・寿命短縮、屋内・車内の高温化、CO2排出量増加によるSDGs評価低下。 なぜ遮熱できないのか：単体材料では「遮熱」と「UVカット」「明るさ確保」を両立できない 従来の暑熱対策資材は、（1）遮光カーテン・暗色フィルム＝室内が暗くなり昼間も照明が必要（2）一般的なUVカットフィルム＝紫外線は止まるが近赤外線は通す（3）断熱材後付け＝施工コスト・工期が大きいという3つの壁を抱えていました。「明るさを保ったまま」「近赤外線（熱線）を反射し」「UVを遮蔽し」「猛暑期だけ簡単に取り外せる」――この4条件を1枚で満たす材料が市場には少なく、結果として現場では複数部材の併用や暑さの我慢が起きていました。●特定の根拠：JIS L 1951（遮熱性）／JIS L 1925（紫外線遮蔽率）に基づく自社評価データ・現場検証データ・自動車ダッシュボード▲10℃・人工芝▲15℃・・日傘表面▲22℃・アスファルト・コンクリート▲13℃など これまで試した対策とその限界 遮光カーテン・暗色フィルムの設置（室内が暗くなり業務効率が低下）、汎用UVカットフィルム（紫外線は止まるが熱線は素通り）、断熱材後付け（工期・コストの壁で見送り）、エアコン能力増強（電気代がさらに上昇）など、複数の打ち手が試されてきましたが、いずれも遮熱・UVカット・明るさ確保・低コスト・取り外し容易性の同時成立に至りませんでした。これらの限界を踏まえ、より抜本的な打ち手として下記アプローチを採用しました。 解決アプローチ：IR反射層 × UV遮蔽 × 3グレード展開で用途別に最適化 不織布タイプ シート強化タイプ 当社が自社開発した遮熱・UVカットシート「F+COOL」は、太陽光エネルギーの約50%を占める近赤外線（IR）領域を高効率で反射する設計と、UV遮蔽率99.9%以上の機能を1枚に統合。さらに不織布／シート強化の2グレード展開と水戸加工センターでの加工対応により、窓・屋上・室外機・テント・日傘・カバーなど用途に応じて最適仕様を選択できます。 STEP. 01 用途ヒアリングとグレード選定 屋内向け（窓・床・天井）か屋外向け（屋上・室外機・テント・タープ）か、必要な明るさ・耐候性・防炎仕様の有無をヒアリングし、不織布タイプ／シート強化タイプ（防炎仕様）から最適グレードを提案します。 STEP. 02 サンプル提供と現場検証 A4サイズ1枚130円〜の手軽な小ロットから提供し、お客様現場での表面温度・室温の実測検証を支援。当社実機検証（ダッシュボード▲10℃／人工芝▲15℃／窓貼付▲3〜4℃／日傘▲22℃／アスファルト▲13℃ など）を提示し、効果を数値で見える化します。 STEP. 03 加工・施工方法のご提案と量産供給 水戸加工センターでの指定サイズにスリット、小巻化に対応。窓設置・室外機カバー・タープ・日傘等の作製事例をご提供。量産化が必要な場合は、ロール出荷（巾1,000mm／指定条長）で安定供給します。 フジケミ・トレーディングの提供体制：本社開発 × 水戸加工センター × タイ拠点の3拠点連携 本ソリューションは、複数拠点の役割分担で成立しています。・本社・営業／技術：F+COOL開発元としてのデータ提供、用途別グレード提案、商標登録の保全。・水戸加工センター：指定サイズへのスリット、小巻化の二次加工対応、小ロット即出荷。・当社海外拠点：ASEAN市場での現地検証（鉄板・人工芝での実測データ取得）、現地法人経由の輸出販売・サンプル送付。 遮熱シート（ロールカーテン） タイ現地での検証（鉄板） ●供給体制：A4サイズ1枚130円〜の小ロットから1,000mm巾ロール出荷まで対応。猛暑期前の繁忙期にはまとめ取りも可能です。 導入による成果 工場・事務所での導入では、窓周り表面温度が3〜10℃低下し、エアコン設定温度を1℃上げるだけで電気代が10〜13%変動する経済性から、室温▲3℃で電気代▲約30%の効果が試算されています。屋外機器・ベンチ・人工芝・日傘でも表面温度差10〜22℃の遮熱効果を実測。リフォーム会社のYouTubeチャンネル等でも紹介され、認知度が向上しています。●KPI候補：表面温度低減（▲10〜15℃）／UV遮蔽率99.9%以上。●導入リードタイム：サンプル評価から本格採用まで短期間。A4サイズ即出荷可、量産巾1,000mmは指定条長で対応。 自社検証データ（抜粋） 自動車ダッシュボード 検証環境（気温29℃） ダッシュボード▲10℃／F+COOL部 45℃ 公園ベンチ 検証環境 ベンチ▲10℃／F+COOL部 35℃ 人工芝 検証環境（気温37℃） 人工芝▲10℃／F+COOL部 56℃ 想定される波及効果と横展開 本ソリューションの導入効果は、主課題の解決にとどまりません。社内提案・経営層提案の材料としてもご活用ください。・工場ランニングコスト削減 → CO2削減レポート・CSR資料への数値貢献・労働環境改善（屋根・窓近傍の暑熱緩和）→ 離職率低下・生産性向上・店舗・住宅・公共施設（公園ベンチ・観戦施設・駐車場）への横展開・自動車・ベビーカー・ヘルメット・日傘など雑貨BtoCマーケットへの拡張・ASEAN各国（タイ等）での現地販売・OEM展開 ベビーカー フードカバー ヘルメットカバー 工場引き戸（外側） 工場引き戸（内側） 同業他社との違い：なぜフジケミ・トレーディングが選ばれるのか 市販の汎用遮熱フィルム・カーテンに対し、F+COOLは「IR反射＋UV遮蔽率99.9%以上＋明るさ確保」を1枚で実現し、JIS認証に則った自社測定で性能を裏付けています。さらに当社は商社機能を活かし、原反販売・水戸加工センターでの二次加工・海外拠点での展開・少量小口販売（A4 1枚〜）まで一気通貫で対応。リフォーム会社や個人ユーザーにも届く価格帯・流通体制を持つ点が独自の強みです。 製品情報・スペック概要 採用実績のある製品の主なスペックは、用途と要求条件によって複数のグレードからお選びいただけます。代表的な仕様は以下の通りです（詳細スペックはお問い合わせください）。 仕様不織布タイプシート強化タイプ（防炎仕様）製品巾1,000mm1,000mm製品長指定条長指定条長厚み（代表値）230μm130 / 200μm遮熱性 ※JIS L 195150（S45）%不織布タイプ相当紫外線遮蔽率 ※JIS L 1925≧99.9%不織布タイプ相当参考価格（不織布標準）A4：130円〜／500×1,000mm：750円〜（送料別） 活用方法・運用例 実際の運用は、以下のようなパターンが多く採用されています。・窓ガラスへの設置：F+COOLを裁断し上下を折り返し縫製、突っ張り棒で取り付け。冬場は取り外し可能。・エアコン室外機カバー：天板サイズに合わせ裁断し両面テープで貼付、室外機表面温度▲約15℃。・タープ・すだれ：ハトメ加工＋紐固定でDIY可能、屋外イベント・店舗ファサードに。・日傘：10本〜のオーダーメイド対応（サイズ2種類）、表面温度▲22℃・影部▲13℃の実測。・屋外ベンチ・人工芝・アスファルト：敷設で表面温度▲10〜15℃、駐車スペース・レジャー・公園施設に。・ベビーカー・ヘルメット・自動車ダッシュボードカバー：日射を受ける部位の温度低下と熱ダメージ軽減。 窓ガラスへの適用 エアコン室外機カバー タープ（すだれ） 日傘への適用 メディア掲載（YouTube）：仙台のリフォーム会社「失敗しないリフォームへの案内人」 FAQ（よくある質問） JIS認証試験について 遮熱性はJIS L 1951、紫外線遮蔽率はJIS L 1925に基づき、社内測定をしております。 暗くなりませんか 障子紙のような明るさを保ちながら近赤外線を反射する設計です。屋内照明をつけずに昼間の業務を継続できます。 冬場の取り外しはできますか 突っ張り棒・両面テープ・ハトメ＋紐固定など、用途に応じた取り付け方法をご紹介しています。猛暑期だけの使用が可能です。 防炎仕様はありますか シート強化タイプは防炎仕様品を選定可能です。建物・店舗での使用に対応します。 小ロット・少量での購入は可能ですか A4サイズ（210×297mm）1枚130円〜、500×1,000mm 1枚750円〜（送料別）から少量販売しています。サンプル評価から始めていただけます。 関連する用途・課題別の提案 ■タイの工場電気代を削減する遮熱塗料ソリューション｜現地施工パートナー手配｜中国・タイ・ベトナム3拠点連携■ホットメルトシートで接着工程の有機溶剤・乾燥工程を削減｜少量・小口・短納期で環境配慮型接着を実現■新素材HUMOFIT®で体温フィット製品のサイズフリー化を実現｜温度依存性シートの少量・小口・加工販売
コストダウン
加工サービス
猛暑対策 x SDGs
環境・省エネ対応
自社開発オリジナル製品
Root-Zone Water Retention for Drought and High-Temperature Stress Countermeasures | On-Site Demonstration Solutions for Biodegradable Superabsorbent Polymers (EF Polymer)
For regions where seedlings must be raised with limited irrigation, such as during prolonged dry seasons or in sandy soils, we propose a combination of the biodegradable superabsorbent polymer "EF Polymer" and a root-zone water retention process based on local verification. Starting with demonstrations in Nigeria, we are driving global expansion into the agriculture, afforestation, and greening sectors. The Water Shortage Challenge of "Prolonged Dry Seasons × Sandy Soil" Occurring in Nigeria As dry seasons lengthen and rainfall becomes unpredictable, limited irrigation is absorbed by sandy soil before reaching the root zone, making survival rates and growth unstable. Securing and efficiently utilizing agricultural water has become urgent. Even if the irrigation volume is increased, water escapes in sandy soil, leading only to soaring costs.● Scenarios where this becomes apparent: Overseas farmland and afforestation sites. Backed by the prolongation of dry seasons due to climate change.● Main impacts: Decrease in seedling survival rates, uneven growth, and deterioration of crop yields and afforestation success rates. Why Increasing Irrigation Does Not Solve the Problem: Dual Factors of Natural Elements and Soil Physical Properties In addition to natural factors (prolonged dry seasons and unpredictable rainfall), the water retention capability of sandy soil is low, making it impossible to retain water in the root zone.● Grounds for identification: Observations at local fields and control test data. Countermeasures Attempted So Far and Their Limits Increasing irrigation volume (limited by water costs and labor) and water-retaining mulch materials (washed away by wind and rain).Based on these limitations, we adopted the following approach as a more fundamental solution. Solution Approach: EF Polymer × Local Control Tests × Packaging of the Application Process Proposing a new material (biodegradable superabsorbent polymer) combined with collaboration between overseas bases and partner trading companies, and designing a root-zone water retention process based on local verification (control tests). STEP. 01 New Material Proposal Selecting EF Polymer (biodegradable superabsorbent polymer) STEP. 02 Local Control Tests Optimizing application and irrigation processes for each crop and soil condition STEP. 03 Leveraging Partner Networks Supplying locally through overseas bases and overseas partner trading companies Fuji Chemi Trading's Supply System: Headquarters × Overseas Bases / Overseas Partner Trading Companies × Partner Manufacturers This solution is established through a clear division of roles among multiple bases:・Headquarters / Sales: Project promotion and inquiry contact window・Overseas Bases / Overseas Partner Trading Companies: Local sales and distribution・Partner Manufacturers: EF Polymer supply and physical property data provision● Supply System: Verification in local fields → Packaging and supplying the application process. Results of Implementation Soil water retention capability is improved, stabilizing seedling survival and crop growth even with limited irrigation.● KPI Candidates: Improvement in survival rate / Growth volume per unit of irrigation / Crop yield / Afforestation success rate.● Implementation Lead Time: Phased operation from local verification to establishing the application process and formal implementation. Anticipated Ripple Effects and Horizontal Expansion The benefits of implementing this solution extend beyond solving the primary issues. Please utilize this as material for internal and management proposals.・Opportunities to participate in ODA and international organization (FAO, JICA, etc.) projects・Expansion into sectors other than agriculture (greening, turf, urban heat island countermeasures)・Since EF Polymer is biodegradable, it serves as a strong appeal for "plastic-free" and "prevention of soil contamination"・Brand enhancement through connection with climate change adaptation and SDGs (Goals 2, 6, 13, and 15) Differences from Competitors: Why Fuji Chemi Trading is Chosen Trading companies exporting polymers standalone have thin on-site verification know-how. Fuji Chemi can provide a one-stop service of "material supply + local control tests + application process design." Product Information & Specification Overview The main specifications of products with a proven track record can be selected from multiple grades depending on the application and required conditions. Representative specifications are as follows (please contact us for detailed specs). ItemContentProduct NameEF Polymer (100% bio-based superabsorbent polymer / water-retaining material)Raw Materials / FeaturesUpcycling crop residues such as fruit peels and pomace (circular economy)ShapeGranular / Powder / Biodegradable small pouches, etc. (depending on application and grade)Main ApplicationsAgriculture (open fields and greenhouses) / Seedlings and transplanting / Afforestation and greening (water retention and drought stress countermeasures)Potential ApplicationsBeauty and cosmetics (liquid foundation, lipstick, etc.) / Facial sheets / Packaging (earth-returnable wrapping)Related AreasOpportunities to participate in ODA and international organization (FAO, JICA, etc.) projects Utilization Methods and Operation Examples In actual operations, the following patterns are frequently adopted:・Evaluation Phase: Requirement hearing → Sample evaluation → Specification finalization・Pre-Mass Production Preparation: Division of roles across bases, specification standardization, and local startup・Mass Production Phase: Ensuring short delivery times and stable supply through our supply system・Horizontal Expansion: Supporting expansion into other bases and projects FAQ (Frequently Asked Questions) How do you proceed with local verification? We conduct hearings regarding soil quality, root structure, and irrigation methods, and then perform control tests with and without EF Polymer on a ridge-by-ridge basis. Are there any restrictions on target crops? It can be widely applied from open field and greenhouse vegetables to afforestation and greening. We design the application position and timing for each crop. Is expansion into fields other than agriculture possible? Yes, there is potential for application in greening, turf, urban heat island countermeasures, beauty and cosmetics, and packaging fields. Is collaboration with ODA and the public sector possible? Yes, we can accept consultations regarding opportunities to participate in projects for international organizations such as FAO and JICA. Can you provide multilingual data sheets? We are currently preparing multilingual reference materials for overseas projects. Please let us know your requirements. Proposals by Related Applications and Challenges CASE 20 | 100% Eco-Friendly Water-Absorbing & Deodorizing Bag (F+BAG ACE)CASE 22 | Compact Seawater Desalination Equipment WAQUACASE 01 | Reducing Factory Running Costs via Heat-Shielding Paint
EFポリマー（生分解性超吸水性ポリマー）
コストダウン
海外提携
環境・省エネ対応
高機能材料 x 新規開発
Overseas Procurement + Domestic Slitting of PET Film for Power Cables | Cost Reduction While Maintaining Equivalent Quality
In response to the risks of rising domestic PET film prices and supply chain factors, we offer a combined package of new overseas PET film sourcing and domestic slitting services for power cable manufacturers seeking both cost improvement and stable supply. With our three-pronged advantage of "Equivalent Quality × Cost Reduction × Domestic Support," we contribute to maintaining the competitiveness of your cable selling prices. Deteriorating Cost-to-Sales Ratio of Power Cables and Demands for "Equivalent Quality × Cost Reduction" The goal is to reduce the procurement cost of PET film for power cables, while maintaining quality equivalent to conventional products.Domestic products offer stability but come at a high price. Overseas products feature attractive pricing but raise concerns regarding quality and logistics.●Scenarios where this becomes apparent: Continuous cost structure review phases. Initiated by proposals from Fuji Chemi.●Main impacts: Deterioration of the cost-to-sales ratio, decline in cable selling price competitiveness. Why Domestic Price Renegotiations Have Reached Their Limit: Price Increases and Supply Chain Factors Rising prices of domestic PET film and supply chain factors (extended lead times).●Specific Rationale: Prototype evaluation of overseas PET candidates, demand volume estimations. Measures Tried So Far and Their Limitations Price renegotiations for domestic products (limited impact), consideration of direct import of overseas PET (burden of customs clearance and slitting processes).Based on these limitations, we adopted the following approach as a more fundamental solution. Solution Approach: New Overseas Supplier Sourcing × Domestic Stock × Slitting Process By sourcing from new overseas manufacturers and combining it with domestic inventory + slitting processing, we maintain the same delivery conditions for customers as conventional products. STEP. 01 Overseas Supplier Sourcing Discovering overseas PET that matches required physical properties STEP. 02 Domestic Stock Holding buffer stock at the Mito Processing Center STEP. 03 Slitting Process Short lead time supply at customer-specified widths Fuji Chemi Trading's Supply System: Headquarters × Mito Processing Center × Overseas Manufacturers This solution is established through the division of roles across multiple locations.・Headquarters / Domestic Sales: Customer contact window and cost proposals・Mito Processing Center: Acceptance inspection, slitting, and inventory management・Overseas Bases / Manufacturers: Import of master rollsSupply system: Immediate delivery with customer-specified slitting from domestic stock. Results Achieved Through Implementation Replicating equivalent quality even with overseas products. Simultaneously providing cost reduction, inventory, and slitting services.●KPI Candidates: Procurement cost reduction / Maintaining zero quality complaints / Inventory reduction on the customer side.●Implementation Lead Time: Gradual transition from demand confirmation to prototyping, and then to mass production switching. Expected Ripple Effects and Horizontal Rollout The effects of implementing this solution extend beyond solving the primary challenge. Please also utilize this as material for internal and management-level proposals.・Horizontal rollout to other PET applications in the wire and insulation fields (battery separators, tapes, laminates)・Proposing alternatives for global raw material procurement by leveraging overseas sourcing expertise・Can also be used as a price negotiation tool with domestic suppliers・Expansion into "multi-sourcing" proposals from a BCP perspective Difference from Competitors: Why Fuji Chemi Trading is Chosen Unlike general trading companies that only perform direct import of overseas PET, Fuji Chemi combines it with "domestic slitting and inventory support," enabling both mass production quality maintenance and short delivery times. Product Information & Specification Overview The main specifications of products with a track record of adoption can be selected from multiple grades depending on the application and required conditions. Representative specifications are as follows (please contact us for detailed specifications). ItemSpecificationsPrimary ApplicationPET film for power cables (insulation, lamination applications, etc.)Master RollOverseas manufacturer products (comparative selection of candidates matching required physical properties)Domestic StockHolding buffer stock at the Mito Processing CenterProcessing SupportSlitting process (customer-specified width)Delivery TimeImmediate delivery with customer-specified slitting from domestic stockQuality ConfirmationStable supply achieved through acceptance inspections and physical property comparisons How to Use & Operational Examples The following patterns are frequently adopted for actual operations.・Evaluation Phase: Requirement hearing → Sample evaluation → Specification finalization・Pre-Mass Production Preparation: Division of roles across locations, specification standardization, and local launch・Mass Production Phase: Ensuring short lead times and stable supply through our supply system・Horizontal Rollout: Supporting expansion to other bases and projects FAQ (Frequently Asked Questions) Is quality stable even with overseas products? We select overseas manufacturer products that match the required physical properties and ensure quality through acceptance inspections. Based on actual cases, we maintain zero quality complaints. Are there risks involved in switching from domestic products? Since the transition proceeds after conducting preliminary evaluations and demand estimations, risks can be minimized. How do we proceed with multi-sourcing from a BCP perspective? We will design a BCP plan together with you, such as using domestic and overseas products in combination, or running multiple overseas suppliers concurrently. Can you handle film materials other than PET? We can make proposals according to your application, such as films for battery separators, tapes, and laminations. Will the domestic sales contact window remain the same? Since domestic sales and the Mito Processing Center will handle it, your contact window will not change. Proposals by Related Applications and Challenges ■ Stable Supply and High Quality of Fluoropolymer Films (FEP/PFA) | Providing Multiple Samples with Short Lead Times via In-house Slitting■ BCP Multi-sourcing of Ferrite Cores for Cable Noise Elimination | Equivalent Quality × Stable Supply × Cost Reduction■ Adoption of Chinese PI Tape for Heat-Resistant Process Films | Cost Optimization with Just-Spec
BCP x 安定供給
PETフィルム（海外調達品）
コストダウン
原価低減
小ロット・スリット加工
Small-Lot & Slitting Services for FPC Release Films | Fast Delivery of Evaluation Samples from Stock
When developing or improving FPC products, finding release films for evaluation often poses a dilemma: standard production lots are too large, while products sourced from overseas e-commerce platforms suffer from unstable quality. By slitting materials directly from our master rolls in stock, we provide the exact sizes you need in small lots. Furthermore, through inventory coordination with our overseas locations, we support you seamlessly from the evaluation phase all the way to mass production. The "Shortage of Evaluation Films" Dilemma in New Product Development and Improvement Sites Engineers want to purchase a small quantity of release films for testing in new product development or current product improvement. However, standard production lots are too large, causing the evaluation process to come to a halt.Requirements are demanded across all aspects: functionality, quality, cost, lead time, environmental compliance, and processability.●When this occurs: New product development and existing product improvement phases.●Main impacts: Prolonged evaluation lead times, increased development costs, and lost business opportunities. Why Small Lots Aren't Available in the Market: The Barrier of Master Roll Units and Standard Lots Because master film rolls are massive and standard production lots are too large, switching to small-lot distribution was previously unsupported in the market.●Specific basis: Customer interviews. Countermeasures Attempted So Far and Their Limitations Purchasing standard production lots (resulting in excess inventory and disposal loss) or sourcing from overseas e-commerce (suffering from unstable quality).Recognizing these limitations, we have adopted the following approach as a more fundamental solution. Our Solution: Master Roll Slitting from Stock × Small Lots in Requested Sizes × Overseas Location Network Slitting from our master rolls in stock to sell small lots in your requested sizes. We also coordinate inventory with our overseas locations. STEP. 01 Proposal of New Materials Selecting a release film that meets the required physical properties STEP. 02 Processing to Customer-Requested Sizes Slitting at the Mito Processing Center STEP. 03 Overseas Location Network Processing and supply are also available at our locations in China, Thailand, and Vietnam as needed Fujichemi Trading's Supply System: Head Office × Mito Processing Center × Overseas Locations This solution is made possible through the collaboration of multiple locations, each with its own role.・Head Office / Domestic Sales: Customer Contact Window・Mito Processing Center: Slitting and Die-Cutting・Overseas Locations: Local Slitting and Inventory Management・Partner Manufacturers: Master Roll SupplySupply System: Processing directly from stock to ensure short lead times and small-lot shipments. Results of Implementation Improvement in functionality and performance, along with enhanced lead times and supply stability. The customer support system has also been strengthened through collaboration with overseas locations.●KPI Candidates: Reduction in evaluation lead time / Reduction in disposal loss / Improvement in development schedule compliance rate.●Implementation Lead Time: Immediate processing from stock. Expected Ripple Effects and Horizontal Expansion The effects of implementing this solution go beyond solving the primary issue. It can also be utilized as material for internal and management-level proposals.・Securing large-lot orders in the mass-production phase after adoption in FPC evaluation・Branding of "R&D Support" centered around small-lot and slitting services・Horizontal expansion to materials other than release films (protection films, functional films)・Attracting SEO traffic from other companies' R&D labs (targeting B2B engineers) Differences from Competitors: Why Choose Fujichemi Trading While most master roll film distributors focus primarily on standard lot sales, Fujichemi Trading seamlessly accompanies you from the evaluation phase to mass production through our unique combination of "Stock + In-House Processing + Overseas Network." Product Information & Specifications Overview The main specifications of our proven products can be selected from multiple grades depending on your application and requirement conditions. Typical specifications are as follows (please contact us for detailed specifications). ItemSpecificationPrimary ApplicationRelease film for Flexible Printed Circuits (FPC)Master RollFunctional film (Selected based on required physical properties)Processing ServicesSlitting and die-cutting to customer-specified sizesMinimum Order QuantitySmall-lot supply available from stockProcessing LocationsMito Processing Center / Overseas Locations (Thailand, Vietnam, China)Lead TimeShort lead-time shipment from stock Application Methods & Operational Examples In actual operations, the following patterns are most frequently adopted.・Evaluation Phase: Requirement Hearing → Sample Evaluation → Finalizing Specifications・Pre-Mass Production: Role sharing across locations, standardization of specs, and local launch・Mass Production Phase: Ensuring short lead times and stable supply through our reliable supply system・Horizontal Expansion: Supporting expansion to other locations and projects FAQ (Frequently Asked Questions) What is the minimum order quantity? We can accommodate small-lot requests from our existing stock. Please let us know your required size and quantity. Can we also request materials other than release films (such as protection films or functional films)? Yes, we welcome consultations for all types of functional films. Are samples provided free of charge? Sample terms depend on the specific project. Please let us know your requirements. Is processing and supply available at overseas locations as well? Processing and supply are also available at our locations in China, Thailand, and Vietnam. Is the transition to the mass-production phase smooth? We can accommodate mass production through the same point of contact and with the exact same specifications as the evaluation phase. Proposals by Related Application and Challenge ■ Anisotropic Conductive Film (ACF) × In-Country Slitting in Thailand: Achieving Space-Saving in Electronic Devices | Integrating Connection, Insulation, and Adhesion into a Single Sheet■ Ensuring Stable Supply and High Quality of Fluoropolymer Films (FEP/PFA) | Providing Multiple Samples with Short Lead Times via In-House Slitting
BCP x 安定供給
タイ拠点
ベトナム拠点
上海拠点
小ロット・スリット加工
離型フィルム（機能性フィルム）
高機能材料 x 新規開発
High-Quality Die-Cutting of LIB / Solid-State Battery Electrodes | Eliminating Burrs and Cracks with Nogami Giken Hand Punches
Die-cutting defects (burrs and cracks) occurring in the electrode evaluation of LIBs and solid-state batteries directly impact the reliability of evaluation data and development schedules. We propose high-performance hand punches manufactured by Nogami Giken, combined with test equipment lending and paid testing. This simultaneously improves evaluation accuracy and development speed while lowering implementation risks. Burrs and Cracks Frequently Occurring in LIB / Solid-State Battery Electrode Evaluation Burrs and cracks occur during electrode die-cutting (test samples) for LIBs and solid-state batteries, compromising the reliability of evaluation data. This affects development schedules.Existing hand punches have insufficient compatibility with electrode materials (thin films and brittle materials).● Scenarios where this becomes apparent: Existing product improvement and new material evaluation phases.● Main impacts: Increased variance in evaluation data, development delays due to re-evaluation, and risks in mass production investment decisions. Why Burrs and Cracks Cannot Be Resolved: Limitations of Blade Shape, Load Settings, and Material Compatibility In addition to the physical property limits of existing materials, there are constraints in the processing design (existing punch blade shapes and load settings).● Grounds for identification: Interviews with responsible personnel and comparative tests with existing hand punches. Countermeasures Attempted So Far and Their Limits Blade replacement of existing punches (limited burr reduction) and trial use of laser cutting (thermal effects occurred).Based on these limitations, we adopted the following approach as a more fundamental solution. Solution Approach: Proposing Nogami Giken Hand Punches × Test Equipment Lending × Paid Testing Developing new opportunities with overseas manufacturers: Assisting implementation decisions through the proposal of hand punches manufactured by Nogami Giken, test equipment lending, and paid testing. STEP. 01 Overseas Supplier Collaboration Evaluating and introducing hand punches manufactured by Nogami Giken STEP. 02 Test Equipment Lending (Consultation required case-by-case) Verifying die-cutting quality within the customer's company STEP. 03 Paid Testing Conducting proxy tests on the Nogami Giken (Fuji Chemi) side Fuji Chemi Trading's Supply System: Headquarters × China Base × Overseas Network × Nogami Giken This solution is established through a clear division of roles among multiple bases:・Headquarters / Domestic Sales: Customer contact window and test equipment coordination・Overseas Bases (China and Global): Demonstrations and deployment for overseas customers・Nogami Giken / Partner Manufacturers: Equipment supply and technical data provision● Supply System: Phased operation: test equipment lending → paid testing → formal implementation. Results of Implementation Achieved improvements in function and performance, stable quality, and reduced defect rates. Enabled the die-cutting of test samples optimal for evaluation.● KPI Candidates: Reduction in burr and crack occurrence rates / Improvement in repeatability of evaluation data / Increased adherence rate to development schedules.● Implementation Lead Time: Proceeding step-by-step from test equipment lending to paid testing and main equipment implementation. Anticipated Ripple Effects and Horizontal Expansion The benefits of implementing this solution extend beyond solving the primary issues. Please utilize this as material for internal and management proposals.・Expansion into next-generation battery evaluations such as all-solid-state batteries and sodium-ion batteries・Accompanying the evaluation phases of electrode material manufacturers and separator manufacturers・Comprehensive proposals to the LIB evaluation equipment market driven by EV market expansion・Horizontal expansion to overseas battery factories (China, South Korea, and Southeast Asia) Differences from Competitors: Why Fuji Chemi Trading is Chosen In contrast to competitors selling equipment standalone, Fuji Chemi lowers implementation risks with a package of "equipment lending + paid testing + overseas collaboration." Product Information & Specification Overview The main specifications of products with a proven track record can be selected from multiple grades depending on the application and required conditions. Representative specifications are as follows (please contact us for detailed specs). ItemSpecificationsCompatible MaterialsLIB electrodes (positive and negative) / Solid-state battery electrodes / SeparatorsDie-Cutting ShapesRound / RectangularFeaturesBlade shape and die-cutting load optimized for electrode materialsEvaluation SupportTest equipment lending / Paid testing supportRelated MarketsEV / All-Solid-State Batteries / Sodium-Ion BatteriesCollaborationDeployable to battery factories and R&D departments in China and worldwide Utilization Methods and Operation Examples In actual operations, the following patterns are frequently adopted:・Evaluation Phase: Requirement hearing → Sample evaluation → Specification finalization・Pre-Mass Production Preparation: Division of roles across bases, specification standardization, and local startup・Mass Production Phase: Ensuring short delivery times and stable supply through our supply system・Horizontal Expansion: Supporting expansion into other bases and projects FAQ (Frequently Asked Questions) What are the conditions for lending test equipment? Please consult with us on a project-by-project basis regarding lending periods, test details, and paid testing prices. Can you also support the evaluation of all-solid-state batteries? Yes, we have a proven track record in evaluating solid-state battery electrodes. Can you support implementation at overseas battery factories? Yes, deployment to battery factories in China, South Korea, Southeast Asia, and global research institutions is possible. Can you introduce evaluation equipment for components other than electrodes (separators, tabs, etc.)? We can propose evaluation equipment for all LIB processes under Fuji Chemi's "Battery Evaluation Lab." What kind of data can be obtained through paid testing? We can provide data such as burr/crack occurrence rates, dimensional accuracy, and repeatability. Proposals by Related Applications and Challenges ■ Accelerating LIB Separator Air Permeability Measurement | Improving Quality Control Efficiency Through Oken Type Air Permeability Testers × Collaboration with China Bases and Overseas Agents■ Small-Lot and Slitting Processing for FPC Release Film | Supplying Evaluation Samples with Short Lead Times from Stock Items
LIB／固体電池電極評価機器
上海拠点
品質向上 x 歩留まり改善
小ロット・スリット加工
野上技研製高性能ハンドパンチ
高機能材料 x 新規開発
Thermal Barrier Paint Solution to Reduce Factory Electricity Bills in Thailand | Arranging Local Application Partners | Collaboration Across 3 Bases: China, Thailand, and Vietnam
In the Thai manufacturing industry, continuous increases in electricity rates and prolonged dry seasons have caused factory electricity bills—primarily for air conditioning—to squeeze profits. Focusing on the application of thermal barrier paint to roofs, we provide one-stop support ranging from electricity bill reduction simulations to the arrangement of local application partners and localized currency quoting. As a realistic solution to lower running costs with low investment and short construction periods, this has already been adopted by multiple Japanese factories. Soaring Electricity Bills in Thailand: What Was Happening Inside the Factories? Electricity rates in Thailand have undergone repeated increases due to fuel cost adjustments, making the pressure on production costs a chronic issue. Especially in factories with large roof areas, coupled with the prolonged high temperatures of the dry season, air conditioning systems run at full capacity constantly, inflating annual electricity bills to a level that demands executive-level management decisions. On the other hand, upgrading power reception and transformation equipment or installing solar power presents high hurdles regarding initial investment, construction periods, and the shutdown of existing facilities, leaving many facilities unable to take action."We want to lower our electricity bills. We also want to deliver results in the context of SDGs and CO2 reduction. However, we cannot commit to capital expenditure on equipment."——We hear these exact concerns from numerous Japanese factories operating local subsidiaries. Why Aren't Electricity Bills Dropping? Radiant Heat from the Roof Keeps Air Conditioning Running Constantly The root cause revealed through on-site inspections and roof surface temperature measurements is a structural issue: the roof and exterior walls lack heat-insulating performance, allowing radiant heat to flow directly into the interior. In some cases, the roof surface temperature exceeds 70°C during the day, and this heat warms up the ceiling space and indoor air, meaning the air conditioning cannot keep up no matter how much it cools.Furthermore, factory buildings in Southeast Asia often have outdated insulation specifications, so upgrading air conditioning units alone rarely provides a fundamental solution—this is the main reason why many hesitate when considering upgrading existing facilities.The basis for identifying this cause comes from cross-referencing the following two points:・Reviewing current electricity bill data provided by the customer・Measuring roof surface temperatures and checking roofing materials during on-site inspectionsBy matching these two datasets, we can conclude with near certainty that "heat inflow from the roof is the dominant factor." Countermeasures Attempted Thus Far and Their Limitations Countermeasures already attempted by many factories share the following common limitations:・ Adjusting HVAC operating hours: The effect is limited, and the system still faces high loads during production hours.・ Considering heat-insulating film application on the roof: Frequently abandoned due to hurdles in cost and construction periods.・ Considering retrofitting insulation materials to existing equipment: Requires halting existing equipment during construction, resulting in too great an impact on production.Given these limitations, thermal barrier paint emerges as the realistic solution—a move that "reduces heat inflow from the roof without stopping existing operations." Solution Approach: Thermal Barrier Paint × Electricity Bill Simulation × Local Application Partners By focusing on top-coating existing roofs with thermal barrier paint and providing the following three components as a complete package, we lower the hurdle for customers to make the decision to "give it a try." STEP. 01 Sourcing Alternative Materials and Replacements We perform a matrix comparison of both Japanese and local manufacturer products based on required performance, roof material compatibility, and cost to select the optimal thermal barrier paint grade. Focusing primarily on products with a proven track record in Thailand, we also obtain evaluation data from cooperating manufacturers as needed. STEP. 02 Presentation of Electricity Bill Reduction Simulations Based on current electricity bill data, HVAC operating hours, roof area, and insulation specifications, we will estimate the post-application electricity bill reduction effects and the payback period. Visualizing the "numbers" necessary for management decisions significantly accelerates the internal approval speed. STEP. 03 Selection of Local Construction Partners and Quotations in Local Currency Leveraging our Thai base as a starting point, we select reliable local application partners and optimize pricing and lead times via local currency quoting. We also propose process designs that minimize the impact on your production, including night/weekend application and split-phase application block by block. FUJICHEMI TRADING's Support Framework: A Powerful Triad of Japan HQ, Thai Base, and Cooperating Manufacturers This solution is realized through a clear division of roles among three parties: Japan HQ (Sales/Technical), our Thai base, and cooperating manufacturers.・ HQ (Sales/Technical): Selects coatings / Prepares electricity bill reduction simulations / Supports decision-making for adopting companies・ Thai Base (Local Subsidiary): Conducts on-site inspections, selects application partners, and provides local currency quoting/contracting / Manages application and construction / Provides after-sales support・ Cooperating Manufacturers: Supplies thermal barrier paint / Assists in grade selection / Provides evaluation data● Supply Framework: Local inventory support and small-lot application are available. This enables a small-start introduction where you can first test the effects on a single building before rolling it out across subsequent buildings. Results of Adoption: Simultaneously Achieving Running Cost Reductions and Workplace Environment Improvements We have received the following qualitative and quantitative result reports from adopting companies:・ Reduction in factory running costs (electricity bills): Achieved a reduction (▲) in electricity bills based on actual customer data.・ Lower indoor and roof surface temperatures: Stabilized summer production efficiency due to improvements in perceived temperature.・ Visualization of the payback period: Increased the precision of management decisions, accelerating subsequent rollout evaluations.・ Rollout track record: Cases exist where introduction to a single building led to expansion across additional buildings and sister factories.● Introduction Lead Time: Rapid turnaround is possible from the initial consultation through estimation to test painting. Anticipated Ripple Effects and Rollouts: 3 Returns Beyond Just Electricity Bill Reductions The effects of adopting thermal barrier paint extend far beyond electricity bill reductions. Please utilize these cascading ripple effects triggered by "heat mitigation" as supporting material for your internal proposals.1. Workplace Environment Improvement → Lower Turnover Rates and Higher ProductivityBy mitigating the extreme heat directly beneath the roof, the workload on workers during hot seasons is reduced. As securing and retaining operators is a pressing management issue in Thai manufacturing sites, improving the workplace environment directly links to lower turnover rates and enhanced productivity.2. Contribution to SDGs and CO2 Reduction ReportsElectricity bill reductions can be directly quantified as carbon emission reductions, leading to immediate score improvements in CSR and supplier evaluations. In an era where global headquarters' procurement standards closely scrutinize "suppliers' CO2 reduction track records," leaving behind quantitative data holds great value.3. Extending the Service Life of Rooftop EquipmentLowering the roof surface temperature reduces thermal stress on outdoor HVAC units and solar panel peripheral equipment, which can be expected to extend equipment life. This creates a double benefit: electricity bill savings combined with delaying future equipment replacement costs.Furthermore, for customers who establish a proven track record of introduction in Thailand, we can also support the horizontal rollout of identical proposals to your factory bases in Vietnam and China. Differences from Competitors: Why Choose FUJICHEMI TRADING? Compared to competitors that only sell coating products (paint manufacturers' direct sales and local chemical trading companies), our unique strength lies in our ability to provide a seamless, end-to-end service encompassing "electricity bill simulations + local application partner arrangements + local currency settlement." Our network, which bridges Japanese-level quality and localized cost structures, is the reason we continue to be chosen.・Difference from Manufacturers' Direct SalesThey do not provide simulations or arrange application partners, requiring customers to handle these arrangements individually.・Difference from Local Paint DistributorsWe offer selection based on Japanese quality standards, along with technical support in Japanese and proposal materials tailored for executive-level management. Product Information & Specifications Overview The main specifications of our proven thermal barrier paints offer a choice of multiple grades depending on the application and roofing materials. Typical specifications are as follows (please contact us for detailed specifications). ItemSpecificationsApplication TypeSelectable from Water-based / Solvent-basedApplicable Roofing MaterialsMetal roofs (folded-plate, ribbed-seam, etc.) / Concrete roofs / Slate roofsStandard Film Thickness100–200 μm (Adjustable depending on application and roofing material)Reflective PerformanceHigh-reflection type can be selected for both visible light and near-infrared regionsWeather Resistance5–10 year class (Varies depending on the product)Application MethodRoller / Spraying (Selected based on on-site conditions)Service AreaAll over Thailand (Identical proposals are also available in Vietnam and China) How to Utilize & Operational Examples In actual operations, the following patterns are frequently adopted:・ Step-by-step introduction building by building: Apply to one building first for effect verification, then expand to additional buildings and sister factories after reviewing results.・ Scheduling before the hot season: To maximize the effect, it is ideal to complete the application before entering the dry season.・ Synchronization with existing facility maintenance: Co-execute with roof waterproofing renovations or HVAC upgrades to compress scaffolding costs and minimize weekend production impacts.・ Standardization across multiple bases: Led by HQ procurement, unify the thermal barrier paint specifications across multiple local factories. FAQ (Frequently Asked Questions) Are there any restrictions on the roofing materials? Our solutions support major roofing materials including metal, concrete, and slate roofs. Since the optimal grade varies depending on the material and shape, we will provide a proposal after an on-site inspection. What is the estimated payback period? It varies depending on the roof area, electricity cost rates, and HVAC operating hours. If you provide your current electricity bill data, we will run a simulation to calculate a specific payback period for you. Can the application be performed without stopping existing production? Yes. We will propose a process design that minimizes the impact on your production, including night application, weekend application, and split-phase application block by block. How can the effects be measured? Measurement is possible by comparing roof surface temperatures, indoor temperatures, and electricity bills. We also support you starting from the selection of representative measurement points. Is support available at overseas bases outside of Thailand? Yes, we can roll out identical solutions at our bases in Vietnam and China (Shanghai). For customers with multiple locations, we can also propose the standardization of specifications across all bases. Proposals by Related Application and Challenge ■ Factory Electricity Bill Reduction & Heat Mitigation | Developing Thermal Barrier & UV Cut Sheets with Custom Processing (Japan-ASEAN Collaboration)■ Reducing Production Line Stoppage Risks via Local Stock in Thailand for Automotive Parts | Supplying Molding Resins and Rubber through BCP Schemes
コストダウン
コストダウン × 海外拠点活用
タイ拠点
原価低減
塗料用樹脂
接着剤
施工パートナー
環境・省エネ対応
遮熱塗料
Improving Foreign Object Removal Rate in Liquid Bath Cleaning of Communication Equipment Parts | Joint Proposal of High-Performance Filter and Local Evaluation in Vietnam
Defects caused by foreign objects occurring in the liquid bath cleaning process of communication equipment parts directly impact downstream yields and complaints. We offer an upgrade to high-performance filters with high collection accuracy and long lifespan, combined with local prototyping and evaluation at our Vietnam base. This approach has successfully raised quality levels in a short period and reduced re-cleaning costs in downstream processes. Deterioration of Yield Caused by Foreign Objects Occurring in Liquid Bath Cleaning Lines Foreign objects remain in the liquid bath cleaning process of communication equipment parts, causing defects to manifest in downstream processes. There is a desire to raise the quality level.The collection accuracy and durability of the current filter fail to meet requirements. An upgrade is an urgent matter.●Scenarios where manifested: Improvement of existing lines. Emerged as a requirement during a quality meeting at the Vietnam factory.●Main impacts: Deterioration of yield, increased re-cleaning costs in downstream processes, and complaints from customers. Why Do Foreign Objects Remain? Limits of Filter Physical Properties and Cleaning Liquid Contamination Physical property limits of the existing filter (collection accuracy and lifespan). Foreign objects re-adhere due to the progression of cleaning liquid contamination.Basis of identification: Interviewing about the quality level on-site / Comparison between defective samples and filter-collected samples. Countermeasures Tried So Far and Their Limits Increasing the filter replacement frequency (limited effect despite increased costs), and adjusting the cleaning liquid concentration (concern over parts damage).Based on these limitations, we adopted the following approach as a more fundamental countermeasure. Solution Approach: Upgrading to High-Performance Filters × Local Prototyping and Evaluation Implemented grade changes of existing materials (replacement with high-performance filters) + on-site prototyping and evaluation. STEP. 01 Alternative Product Search Comparing high-performance filters from multiple manufacturers using technical data STEP. 02 Local Evaluation Rapidly iterating prototyping and on-site evaluation at our Vietnam base STEP. 03 Sharing Technical Expertise The Japanese technical team and local staff collaborate to organize evaluation data Fuji Chemi Trading's Support System: Vietnam Base × Headquarters Technology × Partner Manufacturers This solution is realized through the division of roles across multiple bases.・Vietnam Base: Customer window, on-site evaluation, and prototype delivery・Headquarters / Technology: Filter grade comparison and evaluation reports・Partner Manufacturers: Stable supply of high-performance products and provision of physical property data●Supply System: Local delivery support, small samples for evaluation can be shipped immediately. Results of Implementation Improved collection accuracy reduced defects caused by foreign objects. Yield in downstream processes stabilized.●KPI Candidates: Defect rate reduction / Optimization of filter replacement costs / Reduction of re-cleaning in downstream processes.●Implementation Lead Time: After prototyping and evaluation, rolled out to mass production locally in a short period. Expected Ripple Effects and Horizontal Rollout The effects of implementing this solution extend beyond solving the primary issue. Please also utilize it as material for internal and management-level proposals.・Horizontal rollout to other cleaning lines (precision parts, semiconductor peripherals, substrates)・Collaborative sales with filter housing and filtration equipment manufacturers・High reproducibility under the theme of "complaints caused by foreign objects," making it easy to replicate across operations・Creating a reference case for other factories in Vietnam and other companies Difference from Competitors: Why Fuji Chemi Trading is Chosen Overseas filter trading companies focus mainly on single product sales. Fuji Chemi is capable of offering proposals that combine "local evaluation + Japanese quality + communication equipment expertise." Product Information and Spec Summary The main specifications of products with a proven track record of adoption can be selected from multiple grades depending on the application and requirements. Typical specifications are as follows (please contact us for detailed specifications). ItemSpecificationsMain ApplicationForeign object removal in liquid bath cleaning lines (for communication equipment parts)Filter TypeMultiple grades depending on application (centered on high-performance products)Collection AccuracySelected according to application requirements (micron to submicron)Supported ProcessesPre-cleaning / Main cleaning / Final cleaningLocal EvaluationRapidly iterating prototyping and on-site evaluation at our Vietnam baseDelivery FormLocal delivery support, small samples for evaluation can be shipped immediately How to Utilize and Operational Examples For actual operations, the following patterns are widely adopted.・Evaluation Phase: Requirement hearing → Sample evaluation → Specification finalization・Pre-mass Production Preparation: Cross-base division of roles, specification standardization, and local launch・Mass Production Phase: Ensuring short lead times and stable supply through our supply system・Horizontal Rollout: Supporting horizontal rollout to other bases and other projects FAQ (Frequently Asked Questions) How do we proceed with filter selection? We will interview you regarding the current situation of foreign object generation, the type of cleaning liquid, and flow rate conditions, compare the specifications of candidate filters, and then proceed to prototype evaluation. Can you also support overseas factories outside of Vietnam? Yes, similar prototype evaluation support is also available at our Thailand and China bases. Is it possible to request samples for evaluation? Yes, it is possible. Please let us know your required physical properties, flow rate, and expected foreign object size. Can we also request collaboration with the filtration equipment manufacturer? Yes, we can also propose collaborative sales efforts with filter housing manufacturers and filtration equipment manufacturers. Can you also offer proposals for other cleaning processes (semiconductors, precision parts)? It is also applicable to measures against foreign objects in the fields of precision parts, semiconductor peripherals, and substrates. Proposals by Related Applications and Issues ■Stable Supply and High Quality of Fluoropolymer Film (FEP/PFA) | Providing Multiple Samples with Short Lead Times through In-House Slitting■Joint Development of Low-Contamination Release Separator (Zero Adhesive Residue) | Achieving Both Function and Quality through Optimal Blending of Adhesive × Hardener■Local Procurement of Static Electricity Measures for OA Equipment in Vietnam | Selecting Static Elimination Brushes and Conductive Fibers Aligned with the Manufacturer's Design Philosophy
ベトナム拠点
品質向上 x 歩留まり改善
評価サポート
高機能フィルター
高機能材料
100% Eco-Friendly Water-Absorbent & Deodorizing Bag (F+BAG ACE) | Targetting the Sundry and Disaster Prevention Markets with Biodegradable Non-Woven Fabric & Nature-Derived Superabsorbent Polymer
For the sundry and disaster prevention markets, where plastic reduction and SDGs compliance are highly demanded, we have designed a "100% Eco-Friendly" water-absorbent and deodorizing bag (F+BAG ACE). By combining a nature-derived superabsorbent polymer with biodegradable non-woven fabric, we offer a product design that balances high performance with strong environmental appeal. Growing Demands for "100% Eco-Friendly" Solutions in the Sundry, Disaster Prevention, and Horticulture Markets The goal is to design a water-absorbent and deodorizing bag that balances functionality with environmental compliance (biodegradability) for horticultural materials and portable toilets. Existing products fail to fully satisfy eco-friendly requirements.While conventional superabsorbent polymers utilizing petroleum-derived macromolecules deliver sufficient performance, they lack appeal in terms of environmental sustainability.●Scenarios where this becomes apparent: Existing product improvement and differentiation phases. Driven by the expanding demand for eco-conscious sundry goods.●Main impacts: Loss of distinctiveness, concerns over being weeded out due to SDGs/procurement standards, and the risk of being dropped from store shelves. Why Existing Materials Fall Short: The Trade-Off Between Synthetic Polymers and Environmental Appeal Physical property limitations of existing materials (petroleum-based superabsorbent polymers and polyester non-woven fabrics). The inherent trade-off between biodegradability and water-absorption performance.●Specific Rationale: Iterative material research and prototype evaluations. Measures Tried So Far and Their Limitations Continuation of conventional petroleum-based resins (fails environmental appeal), paper-based alternatives (insufficient water-absorption performance).Based on these limitations, we adopted the following approach as a more fundamental solution. Solution Approach: Nature-Derived Superabsorbent Polymer × Biodegradable Non-Woven Fabric × Iterative Prototype Evaluation Achieving both functionality and environmental compliance through proposed combinations of new materials (nature-derived superabsorbent polymers and biodegradable non-woven fabrics) along with grade adjustments of existing materials. STEP. 01 New Material Exploration Comparing potential nature-derived superabsorbent polymer candidates STEP. 02 Selection of Biodegradable Non-Woven Fabric Balancing functionality and cost STEP. 03 Iterative Prototyping and Evaluation Optimizing performance by varying blending ratios Fuji Chemi Trading's Supply System: Headquarters × Partner Manufacturers This solution is established through the division of roles across multiple locations.・Headquarters / Domestic Sales: Customer contact window and project promotion・Partner Manufacturers: Supply and blending of nature-derived superabsorbent polymers and biodegradable non-woven fabrics●Supply System: Domestic support available, capable of handling prototyping and small-lot operations. Results Achieved Through Implementation Achieving regulatory and environmental compliance in addition to enhancing functionality and performance. Successfully commercialized as a 100% eco-friendly product.●KPI Candidates: Passing biodegradability tests / Maintaining water-absorption and deodorizing performance / Achieving differentiation through environmental appeal.●Implementation Lead Time: Iterative handling from material research to prototype evaluation and mass production. Expected Ripple Effects and Horizontal Rollout The effects of implementing this solution extend beyond solving the primary challenge. Please also utilize this as material for internal and management-level proposals.・Horizontal rollout to applications other than portable toilets (pet sheets, disaster prevention items, agricultural/horticultural materials)・Extending "plastic reduction" proposals to cosmetics and sanitary product manufacturers・The message of being 100% eco-friendly carries significant weight in municipal and public procurement・Can be utilized on the customer side as a case study for ESG/SDGs reporting Difference from Competitors: Why Fuji Chemi Trading is Chosen Trading companies specializing single-handedly in either polymers or non-woven fabrics face difficulties designing combined eco-friendly solutions. Fuji Chemi provides a one-stop response covering "nature-derived materials × biodegradable substrates × formula optimization." Product Information & Specification Overview The main specifications of products with a track record of adoption can be selected from multiple grades depending on the application and required conditions. Representative specifications are as follows (please contact us for detailed specifications). Product No.Superabsorbent Polymer (g/bag)Activated Carbon (g/bag)Outer Non-Woven Fabric (Basis Weight)Product Size (mm)Supplementary NotesFBA63M (Standard)63Biodegradable non-woven fabric (50g/㎡)Approx. W90×D75×H3–5Blending amounts and product sizes can be adjusted upon request.Target Industry(X:3–9)(Y:3–6)——Maximum size: W120×D75 How to Use & Operational Examples The following patterns are frequently adopted for actual operations.・Evaluation Phase: Requirement hearing → Sample evaluation → Specification finalization・Pre-Mass Production Preparation: Division of roles across locations, specification standardization, and local launch・Mass Production Phase: Ensuring short lead times and stable supply through our supply system・Horizontal Rollout: Supporting expansion to other bases and projects FAQ (Frequently Asked Questions) Has it passed biodegradability testing? Materials are selected based on compliant biodegradability test data. Please contact us for detailed data. Are custom specifications other than standard products available? Blending amounts and sizes can be adjusted using the FBAXYM format. Please let us know your requirements. Can this be applied to other uses, such as pet sheets or agricultural materials? Horizontal rollout to pet sheets, agricultural/horticultural materials, and sanitary products is completely possible. Is adoption for public procurement (municipalities and public facilities) possible? The message of being "100% Eco-Friendly" tends to be well-regarded in public procurement. Please feel free to consult us. Can you provide materials for ESG/SDGs reporting? We can provide evidence documentation to support your environmental claims. Proposals by Related Applications and Challenges ■ Root Zone Water Retention to Counter Drought and High-Temperature Stress | On-site Verification Solutions for Biodegradable Superabsorbent Polymer (EF Polymer)■ Factory Electricity Cost Reduction & Heat Mitigation | Developing Heat-Shielding & UV-Cut Sheets via Custom Processing (Japan-ASEAN Collaboration)■ Temperature-Dependent Sheet HUMOFIT® | Mitigating Tightness with F+BAND Fixation Bands for Medical and Sports Applications
F+BAG ACE
環境・省エネ対応
生分解性不織布
自然由来吸水性ポリマー
自社開発オリジナル製品
規制・法令対応
高機能材料 x 新規開発
Inquiry
If you have any comments, questions, or inquiries regarding our products and services, please use the form below.
6F Kyobashi RK-Building, 2-5-15 Kyobashi, Chuo-ku, Tokyo 104-0031 Japan
